Installing your Jazz Guitar Pickups

Installing pickups will give your jazz guitar a better sound, especially if it is not performing as expected. Altering the sound can be based upon the failure of a pickup. Once you have modified or installed a new one, a rich tone will ensue.

The steps to installing jazz guitar pickups

• The first step within the process is to ascertain the pickup which is causing the most trouble and disruption. Many individuals usually discover which one needs to be replaced from the toggle flip located on the board. Discard the cover located behind the guitar and take off the solder on the ground cords. Remember where the solder was located as the new pickup ground cords will be placed there.

• Before fitting your jazz guitar pickups, ensure that the pickup you purchase is compatible with the jazz guitar that you own. Understanding the style and brand of the instrument will be beneficial when trying to achieve your desired sound. 

• Purchase a cord diagram for your instrument and continue with the installation process. Make sure to consult the manual for correct rewiring. There is the possibility of frying the system if wired wrong. Paying close attention to the instructions from the diagram is the only way to succeed. However, if there are mishaps, speaking to a professional can benefit you if you are unsure about the process.

Putting the finishing touches on your installation

• Once you finish rewiring the new jazz guitar pickup simply screw the body back into its original position. If you happen to have a body that is modified take extra care in drilling the screws back into place. The installation has now been completed. If there are any other concerns and questions discuss them with a professional